Ploughs: DP6 SH & HR

This product is Spares-Only
Max Horse Power 240HP
Tractor Ploughing Position IN FURROW ONLY
Furrows 4 TO 8
Weight (Kg)
Underbeam 25.5" TO 27.5"
Furrow Width 12", 14", 16"


Manufactured 1974 to 1991

The DP6 was a semi-mounted reversible in the furrow only plough with a 6" x6" beam fitted with a heavy duty wheel and hydraulic depth control as standard.

The Shearbolt model was available in 4,5 and 6 furrow basic beams with an option to add 2 furrows. A standard underbeam clearance of 25.5" at 34" point to point was available in 12" or 14" furrow widths. A high clearance underbeam of 27" was available at 39" point to point with 14" or 16" furrow widths.

A Hydraulic Reset model was also available in 4,5 or 6 furrow basic beams but with only a single extra furrow option. The 34" point to point plough was available in 12" or 14" with a 26" underbeam. The 39" point to point model was available in 14" and 16" with a 27.5" underbeam.

Additional Information


This plough could be fitted with any type of body using the appropriate leg.

Common body types at the time of manufacture were:

UCN, SCN, SCN Barpoint, YCN,

At the time of manufature they would have been fitted with the "Round" bar type skims, They could however be retro-fitted onto the "Square" Pin Skim type.

Available with cutaway or plain disc.

Accessories available for this plough are:

Knife coulters



See relavent body parts pages in the Spares and service section.